When we hung pegboard in our laundry room, I really thought it would be the solution to keeping the laundry room organized. However, it didn’t quite accomplish what we needed in terms of organization. It looked nice, but it took up valuable shelf space that would serve better as shelving. So, I asked my (sweet) husband to take it down…
We saved the pegboard and frame and will try to find a spot for it in our garage.
After the frame was removed, there were tons of holes to fill…
Once the holes were filled and the room repainted, I began the process of adding open shelving to the laundry room. I needed space for all our junk, and this was the perfect solution.
Earlier this year, I added open shelving to our kitchen nook. You can see the full tutorial for adding easy open shelving HERE.
I followed the same method as before, only I used more modern brackets and 12 inch pine boards (instead of the 8 inch boards in our kitchen).
I planned accordingly and added brackets to studs. I used a stud finder to find them and verified my stud finder with a nail. I marked the wall where each of my brackets should go and used a level to be sure I put them in level.
For this project I used Crates & Pallet 12 in. Forged Steel Shelf Brackets found at The Home Depot. I used six of them and spray painted them gold. They are strong AND gorgeous!
Once all 6 brackets were in, I added my (primed and painted) pine 12 inch boards. It really is so easy – so easy I did these shelves alone!
Want to see the rest of my laundry room makeover? Click HERE!
*This post is a sponsored post by Crates & Pallet. I take pride in reviewing only products that fit my brand and will be beneficial to my readers. And while this post is sponsored, all the opinions are my own.